PLX WOOD (04)
Permanent Antigraffiti Exterior Wood
PRODUCT:
PLX WOOD (P-04): finishing layer
Permanent Antigraffiti Protection.
Anti-graffiti protection in Solvent.
Duration: 5 years.
Cleaning:> 20 cleanings.
Performance: 16-18 m2 / liter
Finish: Satin (P-04).
PRIMER:
IMPRIPUR (P-31): primer layer
Polyurethane sealer primer,
Two-component, Base + Catalyst (9: 1)
Performance: 8 m2 / liter
Finish: shiny.
Advantages and Cleaning:
We recommend the cleaning of graffiti with DECANOL or DECAPARKS
Spraying the surface, wait 3-5 minutes and clean with a cloth
Surfaces where it can be applied:
Outside woods, like wooden benches.
Application
1.-Clean the surface to be protected from dust, dirt and grease.
The surfaces must be sanded very fine and without dust.
The wood should be well dried.
The entire surface of the wood must be sealed with the primer, above and below the bench, it is necessary to avoid water or steam entering, otherwise the protection could crack.
If the bank is painted and the paint is in good condition, do the same.
2.-Apply IMPRI-PUR, 2 layers
Time between layers 1 h (ambient temperature 22º)
Wait at least 6 hours to apply PLX WOOD
It can be applied by brush, roller or gun.
3.- Apply PLX WOOD, a thin layer
It can be applied by brush, roller or gun.
Drying to the touch 1 hour (ambient temperature 22º)
4.-Graffiti cleaning with DECANOL